Release notes
Release Notes
[V9.6]
1. Added support for new controller S10 Pro-H、VX6、X100 Pro-2U;
2.Added support for new Play Box A40;
3. Added support for 3D-Box;
4. Added the timing command funciton;
5. Added the screen beauty function;
6. Added support for some driver ICs and decoding ICs;
7. Support cloud based downloading module calibration coefficients;
8. Support cloud based uploading and downloading of card parameters;
9. Fixed existing bugs.
Release notes
Release Notes
[Version 9.2]
1.Added support for X8m, X12m, X26m, Vx10, S20 PRO, Z3 and X100 Pro series;
2.Added full screen sequencing and multiple senders setting interface functions;
3.Optimized the function of transmitter interface;
4.Added support for some driver ICs and decoding ICs;
5.Added functions of receiver card, such as dynamic correction of thermal effects and editing of correction modules by module;
6.Optimized the grayscale refinement function;
7.Fixed existing bugs.
Release notes
Release Notes
[Version 9.0]
1.Redesigned LEDVISION as two professional applications, which includes a new version of LEDVISION for playback and a LEDSetting for screen control;
2.Optimized the screen configuration, pixel-by-pixel calibration and multi-function card interface;
3.Optimized the screen testing tool with multi-window screen test function added;
4.Removed the network card mode;
5.Added support for X4 PRO, V8 PRO;
6.Added functions of receiver card, such as multi-layer deseam and color exchange;
7.Added support for some driver ICs and decoding ICs;
8.Optimized the specified receiver card operation interface and chip selection interface;
9.Fixed existing bugs.
Release notes
Release Notes
[Version 8.8]
1.Added support for X4m, X2m, S10 Pro-V, Z5 and Z4 Pro;
2.Added support for new receiver K8 and i8;
3.Added parameter setting functions of multiple modules and special-shaped modules;
4.Added the numbering function of transmitter network port;
5.Added screen prestore, correction factor backup and receiver parameters backup functions;
6.Added LED screen correction of virtual pixels;
7.Added support for some driver ICs and decoding ICs;
8.Silan series chips added camera mode optimization function;
9.Fixed existing bugs.
Release notes
Release Notes
[Version 8.6]
1.Support for new controller X8E,X40m;
2.Support X100-7U 8 /10 network board and fiber board mixed insertion;
3.Added Writing HDCP key;
4.Added the HDMI2.0 interface EDID maximum support to 4096, DP interface
supports DisplayID;
5.Support for new Receiver Card E120;
6.Added support for some driver ICs and decode ICs;
7.Added Low Gray Calibration of chip;
8.Added Adjust by Coefficient Method in Batch Adjustment;
9.Fixed some known bugs.
Release notes
Release Notes
[Version 8.5]
1.Support for new controller CM2K,K20,Z6PRO_G2,X16E;
2.Support for new Receiver Card HC5,i10,K10;
3.Added support for some driver ICs and decode ICs;
4.Fix the problem that the flash program cannot be played;
5.Added 16bit/18bit+ Grayscale Refinement function;
6.Added Double Calibration and Low Gray Calibration function;
7.Maximum module width and height support 1023,Maximum Receiver Card width
and height support 2047;
8.Fixed some known bugs.
Release notes
Release Notes
[Version 8.0]
1.Support for new controller S7,S10PRO,Z4(II),X100;
2.Z6PRO/X16 series controller,support for 2 IN 1, 3 IN 1 and DVI*2 sub-boards;
3.Support for new Receiver Card K9+;
4.Added support for some driver ICs and decode ICs;
5.Added display setting function;
6.Added new Receiver Mapping Setting interface;
7.Added 12bit gamma of Receiver Card;
8.Fixed some known bugs.
Release notes
Release Notes
[Version 7.2]
1.Support for new controller S20,S20F,X20,S6VT;
2.Support for new Receiver Card Q20;
3.Support for new Play Box A100,A200;
4.Added support for some driver ICs and decode ICs;
5.Added 14 bit low brightness calibration of Receiving Card;
6.Added grayscale refinement of Receiving Card;
7.Added Infi-bit Gamma of Receiver Card;
8.Fixed some known bugs.
Release notes
Release Notes
[Version 7.0]
1.Support for new controller X12、X16Pro;
2.Support for new Receiver Cards E320、75B V8.0、75E V8.0;
3.Support for new Play Box A35;
4.Added support for some driver ICs and decode ICs;
5.Optimize the main interface, installation interface and uninstall interface;
6.Remove the requirement that the software need Windows administrator rights to run;
7.Deleted the "Play Box Management" part,(Please download the PlayerMaster
software from the official website) ;
8.Revised the interface of brightness adjustment;
9.Added remote control function;
10.Added timing color temperature adjustment function;
11.Added custom aging test function;
12.Added the smart setting function for Shixin Series chip;
13.Optimize playing database, table and Office programs;
14.Fixed some known bugs.
Release notes
Release Notes
[Version 6.9]
1.Support for new controller X2s,X4s,X5/X6/X7,Z4R,eV4,Z6Pro;
2.Support for new Receiver Cards i9+,K9+,E80,75E Pro,RI17;
3.Added support for some driver ICs and decode ICs;
4.Added 128 groups data output;
5.Added low bright gray level optimization function;
6.Added arbitrary void rows and void cols function;
7.Support for gamma curve editing by R/G/B separately;
8.Added schedule management system for cloud Play Box;
9.Added new mult-fuction card setting interface,added some new features;
10.Added "H.265" video format supported ;
11.Fixed some known bugs.