Release Notes

[V2.0 Version]

1. Support 5G FIBERx4 board and corresponding receiving card model (RV5000).

2. Support receiving card model Q1.

3. Added the feature of "No rectangle restriction".

4. Added the feature of sending health monitoring email from the processor.

5. Added support for automatically detecting cloud cabinet pack.

6. Added the feature of "Histogram".

7. Added the feature of reading and writing the original color gamuts of cabinets and modules.

8. Added the feature of viewing detailed functions supported by the firmware of the receiving cards and cabinet parameters.

9. Added the feature of "Dissolve frame" for frame multiplexing.

10. Support setting color depth when creating a new project.

11. Support custom division of modules and cross guide lines for seam correction.

12. Support counting R/G/B dead pixels separately; Support counting detailed data groups of modules with abnormal signals ("Module wiring").

13. Support adjusting brightness in Nits or percentage (%).

14. Added keyboard shortcuts (direction keys and 'Del' key) for custom output layout; Added keyboard shortcuts for switching seams horizontally and vertically during seam correction.

15. Support zooming in the operation area of "COLOR CURVES".

16. Support counting load capacity respectively when "Zero frame delay" and "No rectangle restriction" are enabled.

17. Fixed known bugs.

Release Notes

[V2.0 Version]

1. Support 5G FIBERx4 board and corresponding receiving card model (RV5000).

2. Support receiving card model Q1.

3. Added the feature of "No rectangle restriction".

4. Added the feature of sending health monitoring email from the processor.

5. Added support for automatically detecting cloud cabinet pack.

6. Added the feature of "Histogram".

7. Added the feature of reading and writing the original color gamuts of cabinets and modules.

8. Added the feature of viewing detailed functions supported by the firmware of the receiving cards and cabinet parameters.

9. Added the feature of "Dissolve frame" for frame multiplexing.

10. Support setting color depth when creating a new project.

11. Support custom division of modules and cross guide lines for seam correction.

12. Support counting R/G/B dead pixels separately; Support counting detailed data groups of modules with abnormal signals ("Module wiring").

13. Support adjusting brightness in Nits or percentage (%).

14. Added keyboard shortcuts (direction keys and 'Del' key) for custom output layout; Added keyboard shortcuts for switching seams horizontally and vertically during seam correction.

15. Support zooming in the operation area of "COLOR CURVES".

16. Support counting load capacity respectively when "Zero frame delay" and "No rectangle restriction" are enabled.

17. Fixed known bugs.

Release Notes

[V2.0 Version]

1. Support receiving card models Q1 and RV5000.

2. Support the upgrade of receiving cards without requiring power cycling.

3. Added the feature of sorting receiving cards by port, and added checkboxes for selecting receiving cards in the list.

4. Added the feature of automatically detecting disconnection of the processor.

5. Support the chips and cabinet parameters newly supported by LEDVISION9.6.

6. Fixed known bugs.

Release Notes

[V1.8 Version]

1. Support measuring color gamut by color meter.

2. Increased the speed of cabinet parameter configuration.

3. New user interface for configuring cabinet parameter.

4. Fixed known bug.

Release Notes

[V1.8 Version]

1. Support negative coordinates for cabinets.

2. Support switching between 1G and 5G bandwidth.

3. Support module color adjustment.

4. Support peak brightness adjustment.

5. Support detecting 3D-Box.

6. Support detecting fiber optic transceiver.

7. Added new method for parameter adjustment synchronization across multiple processors.

8. Added capacity calculator.

9. Added switches for seam adjustment and cabinet color adjustment.

10. Added reference value of cabinet parameter on the Gamma slider.

11. Optimized UI design, including the style, color combination and the space between UI elements.

12. Fixed known bug.

Release Notes

[V1.8 Version]

1. Support negative coordinates for cabinets.

2. Support switching between 1G and 5G bandwidth.

3. Support module color adjustment.

4. Support peak brightness adjustment.

5. Support detecting 3D-Box.

6. Support detecting fiber optic transceiver.

7. Added new method for parameter adjustment synchronization across multiple processors.

8. Added capacity calculator.

9. Added switches for seam adjustment and cabinet color adjustment.

10. Added reference value of cabinet parameter on the Gamma slider.

11. Optimized UI design, including the style, color combination and the space between UI elements.

12. Fixed known bug.

Release Notes

[V1.6]

1．Single network port supports multiple cabinet types.

2．Support multi-function card.

3．Simulator supports output port type selection.

4．Added 3D LUT parameters store of Preset.

5．Added cabinet video input monitoring.

6．Added cabinet connection status monitoring.

7．Added module wiring monitoring.

8．Added module pixel detection.

9．Added enhanced power supply monitoring.

10．Added MixingFrame settings.

11．Added one-key loading of cabinet parameters and cabinet type correction.

12．Added zero latency function and video delay frame.

13．Added the display of cabinet supported features.

14．Added the display of processor information (CPU, memory, build time, etc.).

15．Redesigned health view.

16．Optimized the effect of showing/hiding of the property bar and added drag-and-drop file loading in the upgrade interface.

17．Fixed known bugs.

Release Notes

[V1.6]

1．Single network port supports multiple cabinet types.

2．Support multi-function card.

3．Simulator supports output port type selection.

4．Added 3D LUT parameters store of Preset.

5．Added cabinet video input monitoring.

6．Added cabinet connection status monitoring.

7．Added module wiring monitoring.

8．Added module pixel detection.

9．Added enhanced power supply monitoring.

10．Added MixingFrame settings.

11．Added one-key loading of cabinet parameters and cabinet type correction.

12．Added zero latency function and video delay frame.

13．Added the display of cabinet supported features.

14．Added the display of processor information (CPU, memory, build time, etc.).

15．Redesigned health view.

16．Optimized the effect of showing/hiding of the property bar and added drag-and-drop file loading in the upgrade interface.

17．Fixed known bugs.

Release Notes

[V1.6]

1. Added new module current gain adjustment.

2. Added cabinet parameters and type checking.

3. Separated import of cabinet gamut data.

4. Support configuration of different cabinet parameters for a single network port.

5. Support LEDVISION9.2 newly added chip and cabinet parameters configuration.

6. Fixed known bugs.

Release Notes

[V1.2]

1. Support ST2110, 3IN1 input sub-boards.

2. Support Fiberx2_5G, Fiberx4_10G output sub-boards.

3. Support download cabinet packs from the Cloud.

4. Support layer multiplexing and cropping enable/disable.

5. Support multiple cabinet types for a single device.

6. Added thermal effect dynamic calibration.

7. Added single/dual 3D function.

8. Added brightness overdrive, brightness overwrite, low grayscale optimization.

9. Added self-selection of calibration source.

10. Added fast synchronization of the current project to a specified processor.

11. Added backup from optical port and Ethernet port.

12. Added processor list import/export.

13. Added floating tips in the notification center.

14. Added customized image function for test pattern and frame multiplexing.

15. Added dynamic monitoring of cabinet power supply.

16. Added quick on/off switch of processor group for color depth, HDR, calibration, etc.

17. Added color temperature dynamic adjustment.

18. Added HDR dynamic calibration.

19. Added shutter open position and camera sensor settings for ShutterLock.

20. Fixed known bugs.

Release Notes

[V1.2]

1. Support ST2110, 3IN1 input sub-boards.

2. Support Fiberx2_5G, Fiberx4_10G output sub-boards.

3. Support download cabinet packs from the Cloud.

4. Support layer multiplexing and cropping enable/disable.

5. Support multiple cabinet types for a single device.

6. Added thermal effect dynamic calibration.

7. Added single/dual 3D function.

8. Added brightness overdrive, brightness overwrite, low grayscale optimization.

9. Added self-selection of calibration source.

10. Added fast synchronization of the current project to a specified processor.

11. Added backup from optical port and Ethernet port.

12. Added processor list import/export.

13. Added floating tips in the notification center.

14. Added customized image function for test pattern and frame multiplexing.

15. Added dynamic monitoring of cabinet power supply.

16. Added quick on/off switch of processor group for color depth, HDR, calibration, etc.

17. Added color temperature dynamic adjustment.

18. Added HDR dynamic calibration.

19. Added shutter open position and camera sensor settings for ShutterLock.

20. Fixed known bugs.