Release Notes

[V2.2 Version]

1. Auto-detect receiver cards (connected via Ethernet port) in NIC mode

2. Cabinet status LEDs switch

3. Brightness adjustment by percentage

4. Automatic S/N matching for writing calibration data

5. Write thermal effects removal model

6. Write the module current gain in the batch

7. Increased cabinet gamut data writing speed

8. Export cabinet gamut data in .lxy format

9. Fixed known bugs

Release Notes

[V2.0 Version]

1. Support receiving card models Q1 and RV5000.

2. Support the upgrade of receiving cards without requiring power cycling.

3. Added the feature of sorting receiving cards by port, and added checkboxes for selecting receiving cards in the list.

4. Added the feature of automatically detecting disconnection of the processor.

5. Support the chips and cabinet parameters newly supported by LEDVISION9.6.

6. Fixed known bugs.

Release Notes

[V2.2 Version]

1. Fan operation mode setting (Auto, Mute, Balanced, Full speed)

2. DNS configuration

3. Quick synchronization of cabinet packs across processors

4. Scrolling color bar test pattern & export of test pattern images

5. Moved the processor overwrite function to the left side of the pipeline area

6. Integrated primary/backup port status into port tiles

7. Support for color meter 410-vp427A

8. Quick access to the cabinet library when adding cabinets

9. Font library reloading

10. Cabinet status LEDs switch

11. Seam crosshair display toggle (show/hide) and seam adjustment via thumbwheel

12. Backup port monitoring in the health view

13. Processor temperature monitoring

14. Module data included in the health log

15. Optimized UI design

16. Fixed known bugs

Release Notes

[V2.0 Version]

1. Support 5G FIBERx4 board and corresponding receiving card model (RV5000).

2. Support receiving card model Q1.

3. Added the feature of "No rectangle restriction".

4. Added the feature of sending health monitoring email from the processor.

5. Added support for automatically detecting cloud cabinet pack.

6. Added the feature of "Histogram".

7. Added the feature of reading and writing the original color gamuts of cabinets and modules.

8. Added the feature of viewing detailed functions supported by the firmware of the receiving cards and cabinet parameters.

9. Added the feature of "Dissolve frame" for frame multiplexing.

10. Support setting color depth when creating a new project.

11. Support custom division of modules and cross guide lines for seam correction.

12. Support counting R/G/B dead pixels separately; Support counting detailed data groups of modules with abnormal signals ("Module wiring").

13. Support adjusting brightness in Nits or percentage (%).

14. Added keyboard shortcuts (direction keys and 'Del' key) for custom output layout; Added keyboard shortcuts for switching seams horizontally and vertically during seam correction.

15. Support zooming in the operation area of "COLOR CURVES".

16. Support counting load capacity respectively when "Zero frame delay" and "No rectangle restriction" are enabled.

17. Fixed known bugs.

Release Notes

[V2.2 Version]

1. Fan operation mode setting (Auto, Mute, Balanced, Full speed)

2. DNS configuration

3. Quick synchronization of cabinet packs across processors

4. Scrolling color bar test pattern & export of test pattern images

5. Moved processor overwrite function to the left side of the pipeline area

6. Integrated primary/backup port status into port tiles

7. Support for color meter 410-vp427A

8. Quick access to the cabinet library when adding cabinets

9. Font library reloading

10. Cabinet status LEDs switch

11. Seam crosshair display toggle (show/hide) and seam adjustment via thumbwheel

12. Backup port monitoring in the health view

13. Processor temperature monitoring

14. Module data included in the health log

15. Optimized UI design

16. Fixed known bugs

Release Notes

[V2.0 Version]

1. Support 5G FIBERx4 board and corresponding receiving card model (RV5000).

2. Support receiving card model Q1.

3. Added the feature of "No rectangle restriction".

4. Added the feature of sending health monitoring email from the processor.

5. Added support for automatically detecting cloud cabinet pack.

6. Added the feature of "Histogram".

7. Added the feature of reading and writing the original color gamuts of cabinets and modules.

8. Added the feature of viewing detailed functions supported by the firmware of the receiving cards and cabinet parameters.

9. Added the feature of "Dissolve frame" for frame multiplexing.

10. Support setting color depth when creating a new project.

11. Support custom division of modules and cross guide lines for seam correction.

12. Support counting R/G/B dead pixels separately; Support counting detailed data groups of modules with abnormal signals ("Module wiring").

13. Support adjusting brightness in Nits or percentage (%).

14. Added keyboard shortcuts (direction keys and 'Del' key) for custom output layout; Added keyboard shortcuts for switching seams horizontally and vertically during seam correction.

15. Support zooming in the operation area of "COLOR CURVES".

16. Support counting load capacity respectively when "Zero frame delay" and "No rectangle restriction" are enabled.

17. Fixed known bugs.